5
Tempest MasterBelt Operating Manual
5- LCD
While in Operational Mode, the LCD displays the number of BeltStations currently in use with
the MasterBelt. In addition, it includes the name of the MasterBelt, battery life remaining,
channel indicators and other data. The LCD backlight and contrast can be adjusted from the LCD
Adjustments menu screen under the LCD/LED section of the MasterBelt menu.
6- CALL Button
The CALL Button sends a call signal to any wireless BeltStation on the same intercom channel. The Call signal will be routed to intercom
channels indicated by the user’s active Talk button(s).
Note:
The TALK button must be enabled to send a call signal.
1- Rubberized Access Cover
The Rubberized Access Cover helps prevent dust, dirt and liquid from entering the MasterBelt through the
USB or the BeltStation pairing connector. Keep this cover securely closed at all times to ensure the best
possible seal.
2- USB Mini B Connector
The USB Connector is used to charge the MasterBelt with the supplied wall charger. In addition, the USB
connect is used to update the firmware of the MasterBelt.
3- Pairing Connector
The Pairing Connector is used to pair the MasterBelt to BeltStations using the supplied 3.5mm stereo mini
connector.
1- Belt Clip
The Belt Clip enables the MasterBelt to be worn on the user’s belt or other clothing item.
2- Power ON/OFF Button
The Power ON/OFF button is used to turn the MasterBelt ON or OFF. Press and hold the
Power ON/OFF button for two seconds to turn the MasterBelt ON. Press for four seconds to
turn the MasterBelt OFF.
3- Battery Compartment
The Battery Compartment holds either one Tempest Lithium-Polymer rechargeable battery
or (3) standard alkaline AA cells. To remove the battery door, press down on the thumb
markings and pull the battery door toward the bottom of the MasterBelt. To remove
batteries from the battery compartment turn the MasterBelt battery side down and tap the
bottom of the MasterBelt on the palm of your other hand. Please be careful to insert alkaline AA batteries according to the marked polarity. All
of the alkaline AA cells face the same direction. If the battery cover does not fit or close properly, the battery may not be inserted correctly.
Operational Display
