KCM-400
Hydraulic Crimping Tool
www.grupotemper.com
SPECIFIC SAFETY RULES
1.
Maintain labels and nameplates on the tool, These carry important safety information.
If unreadable or missing, contact the agent to replace.
2.
This product is not a toy, keep it out of reach of children.
3.
Do not slide your fingers in the blade profile.
4.
Do not put your fingers in the head of the tool when you slide the blades inside it.
Your fingers could be pinched very severely.
5.
Do not use the tool without blades
6.
Do not cut on live cables or conductors
7.
Do only cut Cu/Al cable and armoured Cu/Al cable
8.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
SAVE THIS INSTRUCTIONS
UNDERSTAND YOUR TOOL
KCM-400 is the tool for cutting Cu/Al cable. It owns many advantages such
as good design, easy operation, high pressure, high efficiency and etc. It is a
perfect tool to be used in electric construction site and other outdoor site.
1. Specification
Item No.:
KCM-400
Cutting force:
60K
Cutting range:
￠
45mm Cu/Al cable and
armoured Cu/Al cable.
Stroke:
50mm
Length:
560mm
Ambient
temperature:
-20
℃
～
40
℃
Net weight
4.8kg
Package:
Steel case
Note: If change knife can cut
￠
38 ACSR or
￠
28 steel wire.
