KCM-400
Hydraulic Crimping Tool
www.grupotemper.com
2
．
Description of the components
Code
Name
Function
1
Upper blade holder For located upper blade
2
Upper blade
for cutting
3
Latch
for locking head
4
Screw
for locking/unlocking handle
5
Pump Handle
For operating
6
Pump handle grip
To avoid slip
7
Limited screw
To limited the position of the cutting head
8
Retract lever
To active the pressure relief valve and to
return the dies into starting position
9
Fixed handle
For storing oil and protect rubber bladder
10
Fixed handle grip
To avoid slip
3. Function description
1.
The 350° free rotate head of the tool enlarge its application.
The design of the limit screw on the head is for preventing the head from dropping or
popping.
2. The head with flip top style contribute to cutting operation.
Make
sure
the
latch
is
wholly
inserted
into
tool
and
keep
still
during operation
3.
The design of the screw on the handle makes it convenient for storage.
4.
The design of two-stage hydraulic system improves working efficiency and
makes it easier to operate.
5.
The retrace lever can return the die and piston quickly to their starting positions
during or after cutting.
6.
The built-in safety valve can measure precise pressure of cutting so to prevent
operator and tool from dangerous.
The built-in safety valve goes through strict pressure test before
delivery, please do not adjust the pressure by unprofessional
person. If the pressure is not enough, please return the tool back to the service center.
The tool only can be re-used after checking and testing by trained person.
