KCM-400
Hydraulic Crimping Tool
www.grupotemper.com
6. The Sealing kit inside the tool will be abraded in some degree after using, when the oil
leaking a lot, please contact the distributor to replace the Sealing kit in timely.
TROUBLESHOOTING
FAULT
ANALYSIS
SOLUTION
A. No pressure or the
pressure is not enough
during operation
1. The pump lack oil
2. There is dust exist in
oil
3. Inner leakage
1. Fulfill or replace the oil
2. Change the oil
3. Contact manufacturer or
distributor
B. Oil leakage on the
head or on the plunger
1. Sealing kit broken
1. Contact manufacturer or
distributor and replace it by
trained person
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS
LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL
ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE
PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND
LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS
OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
