manualshive.com logo in svg

Temelsan DK 1500 LS, User Manual, Page: 50 / 74

Share
Download
Temelsan DK 1500 LS User Manual Download Page 50

 

P a g e

 | 49

 

 

 

 

TEMELSAN MAKİNA SAN. VE TİC. LTD. ŞTİ. 

 

Akçaburgaz Mah. Muhsin Yazıcıoğlu Cad. No:55/1 Esenyurt / İstanbul / TÜRKİYE

 

TEL: +90 (212) 544-2518  FAX: +90 (212) 577-6557  www.temelsan.com   [email protected] 

 

producer company to solve your problem online. If no then 

replace the switch with the new one.  

-

 

RACK LOWER LIMIT REACHED ! 

 

Minimum Guide heigh which is connected to the rack is 400m 
from table. In case the guide reach this point user should turn 
the switch on control panel to manual usage of machine then to 

move the rack up from control panel or from manual usage 
page on screen.  
 

-

 

RACK MOTOR THERMIC ERROR ! 

 
Rack motor has too high temperature on, please check the 
wiring and be sure that the motor wires connected and tithed 

well. 
 

-

 

RACK UPPER LIMIT REACHED ! 

 

Maximum Guide heigh which is connected to the rack is 1230m 
from table. In case the guide reach this point user should turn 
the switch on control panel to manual usage of machine then to 

move the rack down from control panel or from manual usage 
page on screen.  
 

-

 

TABLE BACK LIMIT REACHED ! DRIVE FRONT MANUAL 

 
Maximum table move is 1600mm. In case the table reach the 
max point on back move user should turn the switch on control 

panel to manual usage of machine then to move the table front 
from control panel or from manual usage page on screen.  
 

-

 

TABLE FRONT LIMIT REACHED ! DRIVE BACK MANUAL 

 
Maximum table move is 1600mm. In case the table reach the 

max point on back move user should turn the switch on control 
panel to manual usage of machine then to move the table front 
from control panel or from manual usage page on screen.  
 

 

Summary of Contents for DK 1500 LS











































































Reviews:

No comments