manualshive.com logo in svg

Temelsan DK 1500 LS, User Manual, Page: 15 / 74

Share
Download
Temelsan DK 1500 LS User Manual Download Page 15

 

P a g e

 | 14

 

 

 

 

TEMELSAN MAKİNA SAN. VE TİC. LTD. ŞTİ. 

 

Akçaburgaz Mah. Muhsin Yazıcıoğlu Cad. No:55/1 Esenyurt / İstanbul / TÜRKİYE

 

TEL: +90 (212) 544-2518  FAX: +90 (212) 577-6557  www.temelsan.com   [email protected] 

 

NOTE: If the main motor is running in opposite direction then 2 phases of the electrical 

connections must be interchanged to gain the correct direction of rotation. If any of 

those doors of the machine is open then the machine will not run. Besides, if the 
bandsaw blade is not tightened to a certain level, the sensor switch of the bandsaw 

blade breakage will block the machine as if the bandsaw blade is broken.  

 

 
 

3.

 

Now check the direction of rotation of the hydraulic motor. Check if it rotates in the 

direction of the arrow sign located on the motor itself.  

 

 
 

4.

 

Before replacing the bandsaw blade; open the 3 of those covers in front side of the 

machine and loosen the bandsaw blade tightening shaft. By pulling the loosened 

bandsaw blade towards yourself, let it free from the wheels and the guides. 
 

To install a new bandsaw blade, follow the procedure in reverse direction and apply 

tightening pressure. 

 
ATTENTION! Before replacement of the bandsaw blade turn the machine off from the 

main switch. 

  

While installing the new bandsaw blade notice that the teeth form should be towards 
yourself.  

The bandsaw blade might elongate due to the heat emission during running; check the bandsaw 
blade, tighten it if necessary. 

5.

 

Depending on the diameter and the height of the workpiece adjust the upper bearing of 
the bandsaw blade (the one next to the rack) to prevent collision with the workpiece 
during running and fix the handle. 

 

ATTENTION!: The more close the upper bearing mechanism is to the workpiece the 

more sharp, perpendicular and smooth the cutting will be. 

 

 

Summary of Contents for DK 1500 LS











































































Reviews:

No comments