manualshive.com logo in svg

Temelsan DK 1500 LS, User Manual, Page: 14 / 74

Share
Download
Temelsan DK 1500 LS User Manual Download Page 14

 

P a g e

 | 13

 

 

 

 

TEMELSAN MAKİNA SAN. VE TİC. LTD. ŞTİ. 

 

Akçaburgaz Mah. Muhsin Yazıcıoğlu Cad. No:55/1 Esenyurt / İstanbul / TÜRKİYE

 

TEL: +90 (212) 544-2518  FAX: +90 (212) 577-6557  www.temelsan.com   [email protected] 

 

9.2.

 

INSTALLATION 

Placing the machine to the final installation area will be done by the customer itself. 

 
The customer is fully responsible of the accidents caused by imporper lifting, carrying and 

placing the machine to the installation area. 

 

Installation,  Setup,  Commissioning  and  Initial  Operation  is  under  the  responsibility  of  the 
customer  except  DK-3500.  All  the  machines  except  DK-3500  are  monolithic  and  need  the 

electrical connection only.  

If the electrical connections is done by unauthorized personnel the warranty voids immediately 

and the manufacturer will not be responsible of any circumstances. 

The customer is responsible to provide the cables to be connected to the electrical panel of the 
machine. 

To provide the cables to the electrical cabinet and to 

provide electricity are under customer’s 

responsibility. 

Electrical connections must be done by qualified electricians only. 

The  manufacturer  will  not  be  responsible  if  unauthorized  and  unexperienced  electrical 

technician intervenes the machine. 

The  customer  has  the  right  to  claim  an  authorized  personnel  from  the  manufacturer  to 

check what has been done. Then the customer has to pay for the costs of international flight 
tickets,  hotel  accommodation,  food  and  beverage,  etc.  for  2  personnel  from  the 

manufacturer. 

Make sure that there is no obstacle around/on/in the machine. 

1.

 

Connect 5x4 TTR type of cables to the power terminals in the electrical panel of the 
machine. 

Attention! The machine must be grounded by a yellow-green colored cable.  

 

2.

 

Turn the main switch on. Press the green button controlling the main motor. Now the 

speed control is possible. Press plus-minus signed buttons next to the speed control 
equipment to change the speed of rotation of the bandsaw blade.  

 

Summary of Contents for DK 1500 LS











































































Reviews:

No comments