tema AA-539K Technical And Installation Manual Download Page 29 | Manualshive

Page: 29 / 65

background image

TEMA TELECOMUNICAZIONI SRL

Doorphone AA-560

MAS-AA560-REV04EN

Page 29 of 65

8.5.2. CASE 2 – drive of two electric locks, system PoE powered, one power supply

In this example AA-560 activates the two separate electric locks with a pulse of voltage common to the two electric
locks  (from  an  external  power  supply).  In  the  example  the  relay1  acts  on  the  electric  lock  of  driveway  gate  and
triggers  the  relay2  to  follow  for  activate  the  electric  lock  of  the  pedestrian  gate.  Please  note  that  is  needed  to
connect the blocks TB1 and TB3 as shown, the power supply is unique and common for the two locks and nothing
should  be  connected  to  terminal  TB4  to  power  the  system  (AA-560  feeds  itself  from  the  LAN  cable  +  PoE
connected  to  terminal  TB2).  The  connections  to  be  made  during  the  stages  of  installation  are  shown  in  dashed
lines.

In this example the programming settings for the management of the relays could be:

the relay1 set as “Electric lock”, the relay2 set as “After relay 1” with a suitable delay to open the lock on the
pedestrian gate so that it will be opened more or less when the person who has entered from the main gate will
reach the second door.

LAN network

cable

Power supply

12Vac

Pedestrian gate
electric lock

Driveway gate
electric lock

Hole for the release
of the connector

«
...
27
28
29
30
31
...
»

Summary of Contents for AA-539K


































































Reviews:

No comments

Related manuals for AA-539K

Brand: Gainwise Pages: 13

Brand: Cambridge SoundWorks Pages: 11

Brand: Aiphone Pages: 2

Brand: DOLD Pages: 20

Institutional Series I-35

Brand: Hunter Pages: 2

Brand: Aiwa Pages: 11

Brand: Monacor Pages: 10

NORTHRIDGE N24AWII

Brand: JBL Pages: 4

Brand: T+A Pages: 70

Brand: Meilhaus Electronic Pages: 48

Brand: HAISER Pages: 72

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 32

Brand: Panasonic Pages: 20

Brand: FunkTronic Pages: 71

Brand: RCA Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands