tema AA-539K Technical And Installation Manual Download Page 54

Page: 54 / 65

TEMA TELECOMUNICAZIONI SRL

Doorphone AA-560

MAS-AA560-REV04EN

Page 54 of 65

10. MAINTENANCE

10.1. System

On this page it is possible to check the current firmware version, update software, and backup / restore the system
configuration:

•

MAC address

is the physical address assigned to the network interface.

•

Firmware version

: displays the currently installed version of the program. It is possible to upload a different

version (possibly provided by the technical support of TEMA) using the Browse / Update. Once you've
uploaded the new version, the device must be restarted.

•

License

: enter in this field the license key to activate any additional services (such as the use of messages

over 16 seconds).

•

Backup and restore

: it is possible to save the current settings to restore them in case of a programming

error or device replacement.

•

Reset to factory settings

: all settings are lost and reset to factory defaults. You are prompted to confirm the

operation.

•

Device reboot

: reboot as if it were taken away and put back power. Useful in case you have not physically

present in front of the device and it needs to restart it. You are prompted to confirm the operation.

Summary of Contents for AA-539K


































































Search results

Summary of Contents for AA-539K

Reviews:

Related manuals for AA-539K

Brands by name

Popular brands

tema AA-539K, Technical And Installation Manual

Search results

Summary of Contents for AA-539K

Reviews:

Related manuals for AA-539K

Brands by name

Popular brands