TEMA TELECOMUNICAZIONI SRL
Doorphone AA-560
MAS-AA560-REV04EN
Page 41 of 65
9.5. General parameters
In this section it is possible to set parameters for general use, such as call duration, audio volume, tones, ringing
and so on:
•
Calling try time
: determines how long should be, in seconds, the call attempt to the extension (the called
number is ringing but not responding). At the end of the attempt, the software may be called the second
programmed number.
•
Calling retry numbers
: number of times that must be made the call cycle. At the end of the count of this
parameter is called a possible supervisor
•
Connection time
: once in connection with the extension, the call is torn down anyway after the set time.
Thirty seconds before the end of the call, the system will emit a short beep to the user within the company
and repeats the message every 5 seconds. At this stage it is possible to type on the extension phone the
sequence "#5", which forces the connection time to be reloaded.
•
Answer time for incoming calls
: when the system is called, it answers after the set time. If set to 0,
responds immediately, if 999 never answers. In any case, when there is an incoming call, it is possible to
answer by pressing any key.
•
Connection ad communication code
: when the device receives an incoming call, if this field is programmed,
the audio will not be connected until the user will enter the right connection code.
•
Monitoring code
: as in the previous case, for incoming calls, the audio is not connected until the code is
entered, but in this case only the audio from microphone is connected (a sort of “monitor” function, it is
possible to hear the audio near the doorphone without being heard).
•
Save a snapshot of the caller
: (valid only for Tema Doorphones with camera).
•
Second keypress to close
: it is possible to choose whether, during a call made by the visitor, a further
pressure of a key should interrupt the pressure or if it should be ignored.
•
Send e-mail
: it is possible to choose whether to send an email (to the address given in the configuration
page of the network). Any mail sent as an attachment will have the image of someone who has pressed the
call button.
•
Calling speaker volume
: sets the volume of the audio to the external user. Possible values range from 0
(very low) to 9 (very strong).
