TEMA TELECOMUNICAZIONI SRL
Doorphone AA-560
MAS-AA560-REV04EN
Page 23 of 65
8.2. Inserting or replacing the names associated with the buttons and legend labels
Die-cut label holder
The front panel of the systems with the button has a nameplate field contained in the body of the button. It can be
accessed from the rear of the front panel and you have to act with a thin plier or a similar tool. You will find a pre-
cut white card badge on which you can write the description of the button or to use as a support for your card that
can be created and printed by yourself, keep in mind that this is made easier if you use the appropriate supplied
template file, customizable.
To access to the badges, with the system opened, pull with the help of pliers the sliding plastic tab found in his seat, pull it all
together with the labels.
Place now in reverse order first the custom label, the pre-cut card, and finally re-apply (always putting it sliding) the plastic
labels locking tab. Since the badges can be lit, avoid very thick or opaque or dark cards that will be hard to be visible.
Customizable cards for system legend areas
The front panel of the expansion includes a backlit transparent field useful to give informations for visitors. The
model AA-539R specially designed possesses even two areas. Because the informations to be presented can be
variables for text and graphical form, TEMA has provided a practical system of information badges customizing in a
text file can be edited directly by the person that install the systems or directly by the end user.
In the supplied CD-ROM is present an already prepared file with editable areas writable by the user with the correct
dimensions to be respected as a viewable area. No constraints, however, if not the imagination of those who create
the written information about the content and the style.
The creation of these information badges is simplified by the
use of images and precompiled examples in the above
described "template" document.
After the completion of the information to be presented, print
the necessary pages on a suitable paper, not too heavy to
not affect the ability of the backlighting. Then cut following
the indicated guidelines, in order to obtain the correct size of
information card from the prints.
Place the information cards in the seats provided during installation or subsequent customization at the end of work
as described in the following paragraphs.
