7 |
P a g e
1
GETTING STARTED
1.1
Introduction
Teltonika MVC100 EDGE Camera is a compact mobile surveillance and monitoring system for
transmission of high resolution video and single images via GPRS/EDGE network. In places with no
land line Internet available MVC100 is ideal for remote surveillance and monitoring of temporary or
distant sites or mobile assets. The images can be acquired automatically with programmable period
and/or upon external triggers such as motion sensors or door contacts. The video and single images
can be viewed on a PC or a handheld device, and can also be transmitted to FTP-server and/or by e-
mail.
1.2
Package contents
MVC100 EDGE Camera
External GSM antenna
AC/DC Power adapter (Euro or UK plug)
USB cable
Angled wall mount bracket
Leaflet “Quick Start Guide”
CD with software, drivers and manual
Note
: The manufacturer does not supply the SIM card, which is mandatory for setting up a
connection to the GSM network! The SIM card may be purchased from your GSM (mobile) service
provider!
Note
: If any of the components is missing or damaged, please contact the retailer or reseller
from which this product was purchased.
1.3
Installing the hardware
Before installing the hardware, check package contents to make sure that all items listed above are
available.
1.3.1
Inserting SIM card
Open and remove the back panel of the camera. To do that, use the screw-driver to unscrew
four screws holding panel. After the back panel is removed gently insert the SIM card as showed in
figures below.
Before inserting SIM card do not forget to remove SIM card PIN code request. Otherwise you
will not be able to connect to GSM network.
