16 |
P a g e
2
EDGE CAMERA CONFIGURATION
2.1
Status & Review
2.1.1
Live view
The live view section allows watching video in real time within the camera WEB interface. Also
it contains important status information. The status information view is shown in Fig. 7.
Figure 7.
Status information
GSM operator
– Displays the GSM operator to which camera is connected.
Connection strength
– Displays received signal connection strength.
IP
– Camera IP number.
IMEI
– Camera IMEI number.
Mains
– Shows mains power supply status.
Battery status
– Shows battery energy status.
Live View settings allows setting the desired resolution, quality and format (refer to Fig. 8).
Figure 8.
Live view settings
Resolution
– Select the desired resolution of live view [VGA/QVGA/QQVGA].
Quality
– Select display video quality. [Basic/Medium/Normal/High/Best].
Video format
– Displays allowable video format [JPEG].
Live view session time is set in the section “Live view time out”. When the time expires camera
stops displaying live view. Live view can be started again by pressing Reset button.
Figure 9.
Live view timeout settings
Time remaining
– Displays remaining time before camera stops displaying live view.
Timeout
– Define the time out in minutes and seconds.
