24 |
P a g e
Figure 18.
Mobile network configuration.
Phone Number
– Phone number acquired from your ISP (default *99#).
PPP authentication
– select authentication protocol, which is used by your Internet Service
Provider [None/CHAP/PAP].
APN
– Access Point Name (APN).
User Name
– Enter your User Name for your mobile connection.
Password
– Enter your Password for your mobile connection.
PIN
– SIM card PIN number.
DNS server 1
and
DNS server 2
are ISP domain servers.
Web server (camera) port
– Define port for connecting to camera web interface.
Note: from DNS servers section drop down menu choose option Custom, in order to set DNS
servers.
Set up
Network settings
with data from internet service provider. The Web server (camera)
port is advised to leave 80. After setting all GSM connection information press
Save
button. Camera
will reboot and startup with new settings.
2.4.2.2
Dynamic DNS Settings
Dynamic DNS (DDNS) is a domain name service allowing to link dynamic IP addresses to
static hostname. In order to have functional DDNS feature the SIM card with public static or dynamic
address must be purchased from the GSM Internet service provider.
To start using this feature firstly a hostname must be registered on the DDNS server. The
camera is preconfigured to connect to the www.dyndns.com server for updating camera‟s IP address.
After creating account at www.dyndns.com you will get: Hostname User name and Password.
To link camera‟s IP address to the static hostname, Dynamic DNS settings must be configured.
To configure DDNS connect to the camera WEB configuration page and go to
Network
tab (Fig. 19).
Figure 19.
Dynamic DNS Settings.
Enable
– check the box to enable DDNS.
User name
- enter your user name. The camera will use it to automatically login to update your
IP address in the DDNS server.
Password
– enter you login password.
Hostname
- enter your hostname which was registered in DDSN server.
Update interval
– enter IP address update time in selected time periods.
After filling DDNS settings fields press
Save
button. Camera will reboot and startup with new
settings.
