Teltonika FMA120 User Manual Download Page 75

Page: 75 / 106

0.1

1.0

0.2

Green driving scenario (ID=1890)

U16

Reference for Max Cornering Force values:

•

0,4 - 0,45 G force

–

items that are left on the back seat start to slide to the side while the

car is on turn;

•

0,75

–

0,95 G force

–

most of the cars loose grip on turn (normal environment conditions).

8.6.6

Overspeeding scenario (ID=1895)

This parameter enables/disables Overspeeding scenario. 0

–

disable, 1

–

enable.

Minimum

value

Maximum

value

Recommended

value

Goes with (depends on)

parameters

Value

type

8.6.7

Over Speeding digital output control (ID=1896)

This parameter defines digital output control on Overspeeding scenario. 0

–

disable, 1

–

DOUT1, 2

–

DOUT2.

Minimum

value

Maximum

value

Recommended

value

Goes with (depends on)

parameters

Value

type

Overspeeding scenario (ID=1895)

8.6.8

Max allowed speed (ID=1897)

This parameters defines max allowed speed on Overspeeding scenario.

Minimum

value

Maximum

value

Recommended

value

Goes with (depends on)

parameters

Value

type

260

Overspeeding scenario (ID=1895)

8.6.9

Jamming scenario (ID=1898)

This parameter enables/disables Jamming scenario. 0

–

disable, 1

–

enable.

Minimum

value

Maximum

value

Recommended

value

Goes with (depends on)

parameters

Value

type

8.6.10

Jamming digital output control (ID=1899)

This parameter defines digital output control on Jamming scenario. 0

–

disable, 1

–

DOUT1,

–

DOUT2.

Minimum

value

Maximum

value

Recommended

value

Goes with (depends on)

parameters

Value

type

Jamming scenario (ID=1899)

8.6.11

Jamming sensitivity (ID=1900)

This parameter defines Jamming sensitivity. 0

–

low sensitivity (50 RSSI), 1

–

medium

sensitivity (30 RSSI), 2

–

high sensitivity (10 RSSI).

Summary of Contents for FMA120











































































































Search results

Summary of Contents for FMA120

Reviews:

Related manuals for FMA120

Brands by name

Popular brands

Teltonika FMA120, User Manual

Search results

Summary of Contents for FMA120

Reviews:

Related manuals for FMA120

Brands by name

Popular brands