41
Figure 33 Trip continuous distance counting parameter example
Continuous odometer calculates the distance if
Total Distance
I/O element is enabled. Odometer
Value is constantly saved to flash memory every 30 seconds, but counted every second. After
power is turned off, odometer value saved in flash does not reset.
Start odometer
value with can
be set using configurator (
„set“
button) or SMS/GPRS (setparam/getparam) commands. This
parameter can not be configured via TCP config. If this value is not set, FMA110 starts counting
from 0. Continuous odometer works irrespective of the Trip functionality.
Figure 36 Continuous odometer setting in configurator.
Remember iButton functionality.
If
Remember iButton ID while trip detected
and
Trip
parameters are enabled, ignition is on and iButton is attached, then FMA110 remembers iButton
ID. iButton ID is saved and sent to server with every record. If new iButton is attached during the
trip, FMA110 remembers new iButton ID. FMA110 forgets iButton ID after ignition is off and trip
ignition off timeout is reached.
