67
value
value
value
parameters
type
-180
180
-
All Geofencing parameters
Float
8.6.10.6
Geofence Zone #1 Latitude (Y1) (ID=1034)
Parameter has two meanings dependent on zone shape. If shape is a rectangle, then
ID=1034 is left down corner Y coordinate. If shape is a circle, then ID=1034 is center of that circle
Y coordinate.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
-90
90
-
All Geofencing parameters
Float
8.6.10.7
Geofence Zone #1 Longitude (X2) (ID=1035)
Parameter has two meanings depending on zone shape. If shape is a rectangle, then
ID=1035 is right upper corner X coordinate. If shape is a circle, then ID=1035 is radius of circle
with center of ID=1033 and ID=1034.
For rectangle:
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
-180
180
-
All Geofencing parameters
Float
For circle:
Minimum
value
Maximum
value
Recommend
ed value
Goes with (depends on)
parameters
Value
type
0
1000000
1000
All Geofencing parameters
Float
8.6.10.8
Geofence Zone #1 Latitude (Y2) (ID=1036)
If shape is rectangular, then ID=1036 is right upper corner Y coordinate. If shape circle,
ID=1036 is not used.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
-90
90
-
All Geofencing parameters
Float
Other 4 GeoFence zone’s parameters have the same logic as shown in GeoFence Zone #1.
GeoFence
Zone
Number
Geofence
Zone’s
parameters
1
1030-1036
2
1040-1046
3
1050-1056
4
1060-1066
5
1070-1076
8.6.11
AutoGeofencing
8.6.11.1
Enable/Disable (ID=1101)
Enable – value 1; disable – value 0;
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
1
1
U8
Downloaded from
www.Manualslib.com
manuals search engine
