31
there is at least one operator code in the operator list), device will work in Unknown Acquisition
mode.
This functionality allows having different AVL records acquire and send parameters values
when object is moving or stands still. Vehicle moving or stop state is defined by Stop Detection
Source parameter. There are 3 ways for FM1110 to switch between Vehicle on Stop and Vehicle
Moving modes see section 5.7.
FM1110 allows having 6 different modes. Operational logic is shown in Figure 24.
If there are no operator codes entered into operator list, FM1110 will work in
Unknown network mode ONLY.
Figure 24 Data Acquisition Mode configuration
Operator search is performed every 15 minutes. Depending on current GSM operator,
Home, Roaming or Unknown mode can be changed faster than every 15 minutes. This process is
separate from operator search. Movement criteria are checked every second.
Downloaded from
www.Manualslib.com
manuals search engine
