22
Green Driving Scenario.
Helps to prevent and inspect driver about harsh driving. Scenario
continuously monitors: accelerating force, braking force and cornering angles. Warns driver if
needed. DOUT1 is controlled by scenario for user needs, for example buzzer or LED.
To save GPRS traffic Green Driving
event
will be
generated (included into sent records)
only
when FM1110 measured values are higher than those set in configuration, without
additional I/O settings.
To prevent generating false events, harsh acceleration and harsh braking is monitored only
when following conditions are fulfilled:
Ignition is ON (DIN1 = 1)
Vehicle speed is equal or higher than 10km/h
Harsh cornering is monitored only when following conditions are fulfilled:
Ignition is ON (DIN1 = 1)
Vehicle speed is equal or higher than 30km/h
Note: Green Driving Scenario is a factor on various cars and various drivers
testing phase and can be subject to changes. Teltonika is constantly working
on improvement of the functionality of the devices, and strongly recommends
using the latest version of the firmware.
Over Speeding Scenario
. Helps to prevent from exceeding fixed speed and inspects driver if
needed. DOUT1 is controlled by scenario for user needs, to manage buzzer, LED, etc.
Jamming scenario
. Radio jamming is the (usually deliberate) transmission of radio signals
that disrupt communications by decreasing the signal to noise ratio. When jamming detection is
enabled, FM1110 informs (with buzzer or LED, connected to DOUT1) driver about jamming
event.
Authorized Driving Scenario
. Gives ability to use vehicle only for 50 specific iButton owners
(specified in iButton list). DOUT2 is controlled by scenario for user needs, to manage buzzer, LED,
etc.
Note: In order for Authorized driving to work properly, at least 1 iButton ID
must be written to the iButton list.
Immobilizer Scenario.
Vehicle can be used only if iButton is connected. In this scenario
iButton list is not used; connect any iButton to pass Immobilizer security. DOUT2 is controlled by
scenario for user needs, to manage buzzer, LED, etc.
5.4.2
Trip
Trip customizable feature enables user extended monitoring of performed trips (from
engine start at present location to engine stop at arrived location), log their start and stop points,
Downloaded from
www.Manualslib.com
manuals search engine
