Table 2 Polling Controller Programming Commands
Command
Description
Valid entries
(x = /n=/y=)
Factory
Default
Standalone
Default
Customer
Settings
*10#yy#n#x
#
Port Transfer Codes
(Must reprogram transfer
codes at the switch if these
are changed from Factory
Default)
yy = port
number, 01-16
n = number of
digits
x = transfer
code (0-9,*,#)
Proprietary
Port 1 = 11
Port 2 = 22
Port 3 = 33
Port 4 = 44
Port 5 = 55
Port 6 = 66
Port 7 = 77
Port 8 = 88
Port 9 = 19
Port 10 = 29
Port 11 = 39
Port 12 = 49
Port 13 = 59
Port 14 = 69
Port 15 = 79
Port 16 = 89
*11#y#n#x# Access Code for Remote
Programming
y = device
number, 1-4
n = number of
digits
x = access code
(0-9,*,#)
Proprietary
Device 1 = #1
Device 2 = #2
Device 3 = #3
Device 4 = #4
*15#yy#n#x
#
Port Routing Codes
yy = port
number, 01-16
n = number of
digits, (must be
3)
x = routing code
(0-9,*,#), (must
start with 0)
See Table 5
See Table 5
*16#y#n#x# Remote Programming
Routing Codes
y = device
number, 1-4
n = number of
digits (must be 3)
x = routing code
(0-9,*,#), (must
start with 0)
See Table 4
See Table 4
Note:
All transfer codes must have the same number of digits and must be
unique.
Chapter 4: Programming
40-400-00013, Rev.
C
Page 13
