ISDN Line Simulator User’s Manual
40-400-00012, Rev. E
12
installation, a message may appear saying that a certain file could not be
installed because it is already installed and in use. Continue with the
installation until complete. A Program Window will be created that is labeled
ILS Configuration and includes an icon labeled ILS Configuration. Double
click on this icon to start the software (see Figure 1) and provision the ILS-
2000.
Figure 1. Configuration Software
The ILS-2000 Configuration software will attempt to query the ILS-2000 via
COM1, the default communications port. If a serial cable is connected to
COM1 and the ILS-2000, the loaded configuration will appear on the screen.
If an error message appears, follow the instructions as required. i.e. If the
communications port is other than the default of COM1, select another port
as necessary. When a valid query has been completed, the Configuration
Name will appear as QUERY, with Switch and Line Provisioning settings
shown. No attempt to compare against a stored value is done. Two
message boxes at the bottom of the screen will aid the user in provisioning of
the ILS-2000. The lower left hand message box will display status messages
at different times, such as QUERY, DOWNLOAD, National ISDN-1 defaults,
and other messages. The lower right hand message box provides short
messages about the feature under the cursor, such as, Save User
configuration, when the cursor is over the Save button. It also displays a
time bar when downloading or querying.
