40-400-00022 Rev. B
17
21. SITE NAME & SIGN ON MESSAGE
22. PROGRAMMING PASSWORD
23. PROGRAMMING TIME-OUT
24. TRANSFER CODE CONFIGURATION
25. DATA INACTIVITY TIME-OUT
26. EMERGENCY INTERRUPT
27. OUTGOING CALL PRIORITY
2.
PORT CONFIGURATION
40. MODEM PORT
41. PORT 1
42. PORT 2
43. PORT 3
44. PORT 4
45. PORT 5
46. PORT 6
47. PORT 7
48. PORT 8
49. LOCAL MAINTENANCE PORT
50. DEFAULT PORT
51. LAST PORT RECONNECT
52. PORT ROLLOVER
3.
REPORTS
60. SYSTEM CONFIGURATION REPORT
61. ALARM REPORT
4.
DIAGNOSTICS
80. SET ALARM
81. CLEAR ALARM
82. TIME-OUT ALARM ENABLE
83. PORT LOOPBACK TEST
84. CONTROL LEAD CHECK
85. CONNECT TO MODEM PORT
86. CONNECT TO USER PORT
87. FORCE CONNECTION FROM MODEM PORT TO USER PORT
5.
RESET UNIT TO DEFAULTS
6.
SAVE ACTIVE CONFIGURATION AS USER DEFAULTS
7.
FLASH EEPROM CONFIGURATION
99. EXIT
Detailed Programming Information
If prompted for a Y/N response and Y is used, the parameters to change the
function selected will be displayed. If N or <ENTER> is used, a new prompt,
Select entry > will be displayed. For no changes to any request, <ENTER>
may be used to accept the default value. If <ENTER> is used when Select
entry > is displayed, the Main Menu will be displayed.
1.
SYSTEM CONFIGURATION
The SYSTEM PASSWORD is by default configured with NO password. This
