40-400-00022 Rev. B
29
RTS
Request to Send
CTS
Clear to Send
DSR
Data Set Ready
DCD
Data Carrier Detect
RI
Ring Indication
With no connection all should read low; with the device properly connected
(idle), DTR and RTS are high and the rest low.
The CONNECT TO MODEM PORT will allow direct connection to the Modem
Port for configuration or monitoring of incoming calls.
The CONNECT TO USER PORT will allow direct connection to a User Port
for testing.
Select entry > 4
80. SET ALARM
81. CLEAR ALARM
83. PORT LOOPBACK TEST
84. CONTROL LEAD CHECK
85. CONNECT TO MODEM PORT
86. CONNECT TO USER PORT
87. FORCE CONNECTION FROM MODEM PORT TO USER PORT
99. EXIT
Select entry > 80
Set Alarm
ARE YOU SURE? (Y/N)
y
Alarm Set
Select entry > 80
Set Alarm
ARE YOU SURE? (Y/N)
n
Alarm Not Set
Select entry > 81
Clear Alarm
ARE YOU SURE? (Y/N)
y
Alarm Cleared
Select entry > 81
Clear Alarm
ARE YOU SURE? (Y/N)
n
Alarm Not Cleared
Select entry > 83
SELECT USER PORT TO CONNECT TO (1-8)
Current Value: NONE
New Value :
Use this feature if you need to connect directly to a User port while con-
nected to the Local/Maintenance port. This is beneficial when you wish to
test a connection to a device before calling in via a modem.
Select entry > 84
