40
Reminders
Delete all events
1. Press
Menu
, scroll
or
to
Reminders
and press
Select
.
2. Scroll
or
to the event and press
Options
.
3. Scroll
to
Del. All Events
and press
Select
.
4. Press
Yes
to confirm or
No
to cancel.
5. Press
!
to return to standby.
Switch arriving reminder off
1. When the reminder arrives,
will flash
with alarm ringtone ringing if alarm is
enabled for the arriving reminder.
2. Press
View
to see the details or press
Back
to
stop the alarm. If no key is pressed, the
reminding screen will be cancelled
automatically after 30 seconds.
41
Registration
Register an additional handset
Up to 5 handsets can be registered to one base.
Follow these steps when registering an
additional handset.
To register an additional handset
1. Press
Menu
, scroll
or
to
Registration
and press
Select
.
2. Press
Select
again to access
Register
Handset
.
3. Scroll
or
to the base you want and
press
Select
.
4. Enter the 4-digit System Pin (default setting
is 0000) and press
OK
to confirm.
5. Press and hold
3
on the base station for 4
seconds until In Use LED is flashing.
6. The display will show
Handset Registered
if
the registration is successful.
Select Base
One handset can be registered to maximum 4
bases. If the handset is registered to more than
one base, you can switch between them.
In Use
is marked at the end of the registered base row.
To switch bases
1. At the handset, press
Menu
then scroll
or
to
Registration
and press
Select
.
2. Scroll
to
Select Base
and press
Select
.
The current base will be highlighted.
3. Scroll
or
to select a different
registered base that is marked with
In Use
.
4. Press
Select
to confirm.
De-register a handset
You can use one handset to de-register another.
To de-register a handset
1. Press
Menu
, scroll
or
to
Registration
and press
Select
.
2. Scroll
or
to
De-register
and press
Select
.
3. Enter the System PIN (default setting is
0000) and press
OK
.
4. Scroll
or
to the handset to be de-
registered and press
Select
.
5. Press
Yes
to confirm or
No
to cancel.
6. Press
!
to return to standby.
Note: If you select a non-registered base, the handset
will emit an error tone and stay at the Select Base screen.
You should register the non-registered base first and
then re-select the base after the registration.
Summary of Contents for CR2000 MKII
Page 24: ...46 47...
