Page 15 of 33
9) Please attempt to solve any potential problems using the Help that is available in Windows 3.1x before
contacting Telpar. If you cannot resolve the problem using the help provided from within Windows 3.1x, contact
Telpar between 9am to 5pm.
4.8 Installing a Telpar Printer Driver with Microsoft Windows® 95
1) Prepare the Printer to print from the Personal Computer.
1a) Connect the Printer to the power source.
1b) Connect the cable from the PC to the printer.
1c) Apply power to the Printer.
Note:
If one exists, read the README.TXT file on the Telpar Driver Disk for additional installation and
configuration notes before continuing.
2) From Windows 95, select Start-Settings-Printers.
3) From the “Printers” Window, Click “Add Printer”.
4) From the “Add Printer Wizard” Window, Click the “Next” button.
5) From the next “Add Printer Wizard” Window, Click the “Have Disk...” button.
6) From the “Install From Disk” Window, type in the Floppy Drive Letter you will be installing the driver from if
necessary. Install the Telpar Driver Disk in the Floppy Disk Drive. Click the “OK” button.
7) From the next “Add Printer Wizard” Window, select (highlight) the Printer Driver to be installed and Click the
“Next” button.
8) From the next “Add Printer Wizard” Window, select (highlight) the Port the printer is connected to and Click
the “Next” button.
9) From the next “Add Printer Wizard” Window, change the Printer name if desired in the “Printer name” edit
box.
Note:
If this is not the only printer installed, answer the question “Do you want your Windows-based
programs to use this printer as the default printer?” by selecting a “Yes” or “No” radio button. Click the “Next”
button.
10) From the next “Add Printer Wizard” Window, select “Yes” to “Print a Test Page” if the printer is properly
connected, paper is installed, and the Printer power is on, otherwise select “No”. Click the “Finish” button.
Note:
Telpar recommends you print the test page. It is useful in determining if the installation was successful. The
printer MUST be turned on and ready to receive data. If it is not, select “No” and you can run the test later.
11) After Clicking the “Finish” button as described above, the driver files will be copied from the Floppy Disk to
the Hard Drive, the newly added printer Icon will appear in the “Printers” Window, a Test Page will print on the
Printer and another Window will appear on the Screen asking if the Test Page was printed properly.
12a) If the Test Page printed properly choose “Yes” on the Window as described above and the Installation is
Complete.
12b) If the Test Page did not print properly, choose “No” on the Window shown above and you will be taken to
the Windows Help and asked a series of questions to help diagnose the problem. Please attempt to solve the
problem using the Help that is available in Windows 95 before contacting Telpar. If you cannot resolve the problem
using the help provided from within Windows 95, contact Telpar between 9am to 5pm.
4.9 Installing a Telpar Printer Driver with Microsoft Windows® NT 3.51 Intel
1) Prepare the Printer to print from the Personal Computer.
1a) Connect the Printer to the power source.
1b) Connect the cable from the PC to the printer.
1c) Apply power to the Printer.
2) Install the Telpar Driver Disk in the Floppy Disk Drive.
Note: If one exists, read the README.TXT file on the Telpar Driver Disk for additional installation and configuration
notes before continuing.
3)
From Windows NT Program Manager, select the “Main” Program Group and run Control Panel.
4)
From the “Control Panel”, select “Printers” to run the “Print Manager”.
5) From the “Printer Manager”, select Printer - Create Printer....
6) From the “Create Printer” Window, enter a printer name in the “Printer Name” Edit Box. From the “Print to”
List Box, select the communication port the printer is connected to. From the “Driver” List Box, select “Other...” (At
the bottom of the list).
6a) Once you have selected “Other...”, the Install Driver Window will pop up. Type your Floppy Drive letter in
the “Install Drive” Window and click the “OK”.
