Page 14 of 33
The three SP-5000/2 drivers are:
1) SP-5000/2 - Quarter Screen -
This driver will print a quarter of the printable screen at the full 200DPI
resolution of the printer. The print area will start at the left of the screen. With this driver there is NO scaling.
2) SP-5000/2 - Half Screen -
This driver will print half of the printable screen at the full 200DPI resolution of
the printer. The print area will start at the left of the screen. With this driver the printout is reduced by a factor of 2.
For example, a printable document that is approximately 8" wide will be reduced so that the leftmost 4" will fit on the
2.35" wide SP-5000/2 print area.
3) SP-5000/2 - Full Screen -
This driver will print the full printable screen at the full 200DPI resolution of the
printer. With this driver the printout is reduced by a factor of 4. For example, a printable document that is
approximately 8" wide will be reduced to fit on the 2.35" wide SP-5000/2 print area.
It is recommended that the user install all three drivers and experiment until the resolution that meets your
application is determined.
4.6.2 SP-5000/3 Windows Driver Disk
Since the SP-5000/3 has a 3.125 inch wide print area, two Windows print drivers are provided which should allow
for all printing requirements.
The two SP-5000/3 drivers are as follows:
1)
SP-5000/3 - Partial Screen
- This driver will print 3.125 inches of the printable screen at the full 200DPI
resolution of the printer. The print area will start at the left of the screen. For example, a printable document that is
approximately 8" wide will be truncated so that the leftmost 3.125" will fit on the 3.125" wide SP-5000/3 print area.
2)
SP-5000/3 - Full Screen
- This driver will print all of the printable screen at the full 200DPI resolution of the
printer. With this driver the printout is reduced to the 3.125 inch print area of the SP-5000/3. For example, a
printable document that is approximately 8" wide will be reduced to fit on the 3.15" wide SP-5000/3 print area.
It is recommended that the user installs both drivers and experiments until the resolution that meets the application
is determined.
4.6.3 SP-5000/4 Windows Driver Disk
Since the SP-5000/4 has a 4.4 inch wide print area, two Windows print drivers are provided which should allow for
all printing requirements.
The two SP5000/4 drivers are as follows:
1) SP-5000/4 - Half Screen -
This driver will print half of the printable screen at the full 200DPI resolution of
the printer. The print area will start at the left of the screen. For example, a printable document that is
approximately 8" wide will be truncated so that the leftmost 4.4" will fit on the 4.4" wide SP5000/4 print area.
2) SP-5000/4 - Full Screen -
This driver will print all of the printable screen at the full 200DPI resolution
of the printer. With this driver the printout is reduced by a factor of 2. For example, a printable document that is
approximately 8" wide will be reduced to fit on the 4.4" wide SP5000/4 print area.
Note:
It is recommended that the user installs both drivers and experiments until the resolution that meets
the application is determined.
4.7 Installing a Telpar Printer Driver with Microsoft Windows® 3.1x
1) Prepare the Printer to print from the Personal Computer.
1a) Connect the Printer to the power source.
1b) Connect the cable from the PC to the printer.
1c) Apply power to the Printer.
Note:
Read the README.TXT file on Telpar Driver Disk for additional installation and configuration notes before
continuing.
2) Install the floppy disk with the driver files in your floppy disk drive. From the Windows 3.1x, Main Program
Group, select “Control Panel” and then select “Printers” in the “Control Panel Group”.
3) Click the “Add” Button to view the additional drivers.
4) From the “List of Printers” List Box select “Install Unlisted or Updated Printer”.
5) Click the “Install “ button.
6) Type your floppy disk drive letter in the “Install Driver” Dialog Box and click the “OK” Button.
7) Choose the desired driver by name in the “Add Unlisted or Updated Printer” Dialog Box.
8) Click the “OK” Button to install the driver.
