Telos Nx12, User Manual

Page: 26 / 133

16
| section 2
AES Input XLR
PiN DESCRiPTiON
1 Ground
2
3 Signal -
So that all four hybrids are accessible in spite of the limited rear panel space for connectors, we
use one AES input for two hybrids. The relationship is as follows:
AES 1 Left is to Hybrid A
♦
AES 1 Right is to Hybrid B
♦
AES 2 Left is to Hybrid C
♦
AES 2 Right is to Hybrid D
♦
Most mixing consoles with AES outputs are able to deliver the required split. If not, you might
need an external AES router or combiner to provide this input. An alternative could be to use
an Nx12 configuration requiring only a single mix-minus (see Mix Minus Modes in Section
5.4). The role of each hybrid depends upon the configured Show Mode, which is described in
Section 5.7.
POH (Program on Hold) Inputs
This analog input is for whatever audio you want callers to hear when put on hold, usually your
main program feed. This is an XLR female. This signal is processed by an AGC within the
Nx12.
Output (Caller)
Analog Outputs
The analog audio outputs have the following characteristics:
Active differential
♦
Output level: -10 to +8 dBu, nominal
♦
Clip point: +24dBu
♦
Impedance: < 60 Ohms x 2
♦
Analog Output XLR
PiN DESCRiPTiON
1 Ground
2 Audio +
3 Audio -
When feeding unbalanced devices, use pin 2 for the signal and pin 3 for the ground. Do not tie
pin 3 to pin 1. (Note that this is different from most devices with active balanced outputs. The
Nx12 has a sophisticated output stage that emulates a transformer source.)
AES Digital Outputs
The AES outputs are only present if the AES option was ordered. Characteristics are:
AES3 compliant
♦