FlexSym-ONT205-Installation-Guide
Page 10 of 38
•
UPS
–
Uninterruptible Power Supply (UPS) AC adapter input. This is a special
connector that matches the DC power output cable from the adapter and the
optional Battery Backup Unit (BBU) accessory (not currently available).
•
GE1
–
GE4
Four (4) 10/100/1000 Gigabit Ethernet ports supporting Power over
Ethernet (PoE) devices. These are standard RJ45 Ethernet connectors.
•
MG5
- One (1) IEEE 802.3bz and 802.3an port that supports
10M/100M/1G/2.5G/5G/10G data rates with auto-negotiation
•
Optical Connector(green).
- This is the optical port for connecting the ONT to
the upstream Optical Line Terminal (OLT) over a fiber-optic cable. It is a standard
replaceable SC/APC-type connector for Single-Mode Fiber (SMF) cable. The
connector is protected by a small, black plastic insert in shipping.
Indicators
The top of the ONT has the following LED indicators near the front edge:
•
Power
–
shows status of the DC power input
•
PON
–
shows status of the Passive Optical Network (PON)
•
GE1
–
MG5
–
shows status of the five service ports
