FlexSym-ONT205-Installation-Guide
Page 21 of 38
Unpacking and Inspection
The Tellabs ONT and related accessories to be installed may arrive in a single shipping
container, or in multiple containers. When unpacking the boxes, check each item against
the installation work order and for obvious shipping damage. If a shortage or damage is
found, contact the Tellabs Warranty/Repair and Return Center immediately.
Inside the Box
The FlexSym 205 box contains:
•
FlexSym 205
–
desktop Optical Network Terminal unit (no power supply)
•
Phoenix-type pluggable terminal connector (5.08 mm pitch 2P)
If multiple FlexSym 205 are ordered, or optional accessories are ordered along with the
ONT, they may be packed in the same shipping container, or be shipped separately.
Outside the box
A reusable-adhesive label with the ONT serial number (and barcode representation)
printed on it is affixed to the outside of the box. This label can be peeled off the box and
placed on the ONT case or any other suitable place near the ONT. This can be used to
provide serial number visibility if the permanent label on the bottom surface of the
ONT is hidden. This can occur if the ONT is attached to a wall or underneath a desk or
other surface. The ONT serial number may be needed during provisioning the ONT
using the Element Management System (EMS).
