UC864
UC864
UC864
UC864----E/G/WD/WDU
E/G/WD/WDU
E/G/WD/WDU
E/G/WD/WDU AT Commands Reference Guide
AT Commands Reference Guide
AT Commands Reference Guide
AT Commands Reference Guide
80304ST10041a Rev. 6
80304ST10041a Rev. 6
80304ST10041a Rev. 6
80304ST10041a Rev. 6 ---- 2010
2010
2010
2010----0
00
05
55
5----20
20
20
20
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved.
Page 313 of 329
#STIA
#STIA
#STIA
#STIA ---- SIM Tookit Interface Activation
SIM Tookit Interface Activation
SIM Tookit Interface Activation
SIM Tookit Interface Activation
requires user interaction an unsolicited code will be sent, if enabled with
#STI
#STI
#STI
#STIA
A
A
A command, as follows:
•
if <mode>
<mode>
<mode>
<mode> parameter of #STIA
#STIA
#STIA
#STIA command has been set to 3 (reduced
unsolicited indication) an unsolicited indication will be sent, indicating
the type of proactive command
proactive command
proactive command
proactive command issued by the SIM:
#STN: <cmdType>
#STN: <cmdType>
#STN: <cmdType>
#STN: <cmdType>
•
if <mode>
<mode>
<mode>
<mode> parameter of #S
#S
#S
#STIA
TIA
TIA
TIA command has been set to 2 (extended
unsolicited indication) the format of the unsolicited indication depends
on the specific command:
if <cmdType>=1
<cmdType>=1
<cmdType>=1
<cmdType>=1 (REFRESH)
an unsolicited notification will be sent to the user:
#STN: <cmdType>,<refresh type>
#STN: <cmdType>,<refresh type>
#STN: <cmdType>,<refresh type>
#STN: <cmdType>,<refresh type>
where:
<refresh type>
<refresh type>
<refresh type>
<refresh type>
0 - SIM Initialization and Full File Change Notification;
1 - File Change Notification;
2 - SIM Initialization and File Change Notification;
3 - SIM Initialization;
4 - SIM Reset
In this case neither #STGI nor #STSR commands are required:
•
AT
AT
AT
AT#STGI
#STGI
#STGI
#STGI is accepted anyway.
•
AT
AT
AT
AT#STSR
#STSR
#STSR
#STSR=<cmdType>,0
=<cmdType>,0
=<cmdType>,0
=<cmdType>,0 will answer OK
OK
OK
OK but do nothing.
if <cmdType>=17
<cmdType>=17
<cmdType>=17
<cmdType>=17 (SEND SS)
if <cmdType>=19
<cmdType>=19
<cmdType>=19
<cmdType>=19 (SEND SHORT MESSAGE)
if <cmdType>=20
<cmdType>=20
<cmdType>=20
<cmdType>=20 (SEND DTMF)
if <cmdType>=32
<cmdType>=32
<cmdType>=32
<cmdType>=32 (PLAY TONE)
an unsolicited notification will be sent if allowed by SIM (see 3GPP TS
31.114):
#STN: <cmdType>[,<text>]
#STN: <cmdType>[,<text>]
#STN: <cmdType>[,<text>]
#STN: <cmdType>[,<text>]
where: