Telit Wireless Solutions UC864-E, Reference Manual

Page: 272 / 329

UC864 UC864 UC864 UC864----E/G/WD/WDU E/G/WD/WDU E/G/WD/WDU E/G/WD/WDU AT Commands Reference Guide AT Commands Reference Guide AT Commands Reference Guide AT Commands Reference Guide
80304ST10041a Rev. 6 80304ST10041a Rev. 6 80304ST10041a Rev. 6 80304ST10041a Rev. 6 ---- 2010 2010 2010 2010----0 00 05 55 5----20 20 20 20
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 272 of 329
#DSTO #DSTO #DSTO #DSTO ----Data Sending Time Data Sending Time Data Sending Time Data Sending Time----Out Out Out Out
whose sending would have been delayed for an undefined time until new
data to be sent had been received and full packet size reached.
AT#DSTO?
AT#DSTO? AT#DSTO?
AT#DSTO? Read command reports the current data sending time-out value.
AT#DSTO=? AT#DSTO=? AT#DSTO=? AT#DSTO=? Test command returns the allowed values for the parameter <tout> <tout> <tout> <tout>.
Example AT#DSTO=10
->1 sec. time-out
OK
AT#DSTO?
#DSTO: 10
OK
3.5.7.4.5. Socket Inactivity Time Socket Inactivity Time Socket Inactivity Time Socket Inactivity Time----Out Out Out Out ---- #SKTTO #SKTTO #SKTTO #SKTTO
#SKTTO #SKTTO #SKTTO #SKTTO ---- Socket Inactivity Time Socket Inactivity Time Socket Inactivity Time Socket Inactivity Time----Out Out Out Out
AT#SKTTO= AT#SKTTO= AT#SKTTO= AT#SKTTO=
[<tout>]
[<tout>] [<tout>] [<tout>]
Set command sets the maximum time with no data exchanging on the
socket that the module awaits before closing the socket and deactivating
the GPRS context.
Parameter:
<tout>
<tout> <tout>
<tout> - socket inactivity time-out in seconds units
0 - no time-out.
1..65535 - time-out in sec. units (factory default is 90).
Note: this time-out applies when no data is exchanged in the socket for a
long time and therefore the socket connection has to be automatically
closed and the GPRS context deactivated.
AT#SKTTO? AT#SKTTO? AT#SKTTO? AT#SKTTO? Read command reports the current socket inactivity time-out value.
AT#SKTTO=? AT#SKTTO=? AT#SKTTO=? AT#SKTTO=? Test command returns the allowed values for parameter <tout> <tout> <tout> <tout>.
Example AT#SKTTO=30
OK
->(30 sec. time-out)
AT#SKTTO?
#SKTTO: 30
OK
3.5.7.4.6. Socket Definition
Socket Definition Socket Definition
Socket Definition ---- #SKTSET
#SKTSET #SKTSET
#SKTSET
#SKTSET #SKTSET #SKTSET #SKTSET ---- Socket Definition Socket Definition Socket Definition Socket Definition
AT#SKTSET=
AT#SKTSET= AT#SKTSET=
AT#SKTSET=
[<socket type>,
[<socket type>, [<socket type>, [<socket type>,
<remote port>,
<remote port>, <remote port>, <remote port>,
Set command sets the socket parameters values.
Parameters: