Telit Wireless Solutions UC864-E, Reference Manual

Page: 171 / 329

UC864 UC864 UC864 UC864----E/G/WD/WDU E/G/WD/WDU E/G/WD/WDU E/G/WD/WDU AT Commands Reference Guide AT Commands Reference Guide AT Commands Reference Guide AT Commands Reference Guide
80304ST10041a Rev. 6 80304ST10041a Rev. 6 80304ST10041a Rev. 6 80304ST10041a Rev. 6 ---- 2010 2010 2010 2010----0 00 05 55 5----20 20 20 20
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 171 of 329
+CMSS +CMSS +CMSS +CMSS ---- Send Message From Storage Send Message From Storage Send Message From Storage Send Message From Storage
OK
Reference 3GPP TS 27.005
3.5.5.4.3. Write Message To Memory
Write Message To Memory Write Message To Memory
Write Message To Memory ---- +CMGW
+CMGW +CMGW
+CMGW
+CMGW +CMGW +CMGW +CMGW ---- Write Message To Memory Write Message To Memory Write Message To Memory Write Message To Memory
(PDU Mode)
AT+CMGW=
AT+CMGW= AT+CMGW=
AT+CMGW=
<length>
<length> <length> <length>
[,<stat>]
[,<stat>] [,<stat>] [,<stat>]
(PDU Mode) (PDU Mode) (PDU Mode) (PDU Mode)
Execution command writes in the <memw>
<memw> <memw>
<memw> memory storage a new
message.
Parameter:
<length>
<length> <length>
<length> - length in bytes of the PDU to be written.
7..164
<stat>
<stat> <stat>
<stat> - message status.
0 - new message
1 - read message
2 - stored message not yet sent (default)
3 - stored message already sent
The device responds to the command with the prompt '>' and waits for the
specified number of bytes.
To write the message issue Ctrl
Ctrl Ctrl
Ctrl----Z
Z Z
Z char (0x1A
0x1A 0x1A
0x1A hex).
To exit without writing the message issue ESC ESC ESC ESC char (0x1B 0x1B 0x1B 0x1B hex).
If message is successfully written in the memory, then the result is sent in
the format:
+CMGW: <index>
+CMGW: <index> +CMGW: <index> +CMGW: <index>
where:
<index>
<index> <index>
<index> - message location index in the memory <memw>
<memw> <memw>
<memw>.
If message storing fails for some reason, an error code is reported.
Note: care must be taken to ensure that during the command execution, no
other SIM interacting commands are issued.
(Text Mode)
AT+CMGW[=<da> AT+CMGW[=<da> AT+CMGW[=<da> AT+CMGW[=<da>
[,<toda>
[,<toda> [,<toda>
[,<toda>
[,<stat>]]
[,<stat>]] [,<stat>]] [,<stat>]]]]]]
(Text Mode)
(Text Mode) (Text Mode)
(Text Mode)
Execution command writes in the <memw> <memw> <memw> <memw> memory storage a new
message.
Parameters:
<da>
<da> <da> <da> - destination address, string type represented in the currently