Telit Wireless Solutions UC864-E, Reference Manual

Page: 155 / 329

UC864 UC864 UC864 UC864----E/G/WD/WDU E/G/WD/WDU E/G/WD/WDU E/G/WD/WDU AT Commands Reference Guide AT Commands Reference Guide AT Commands Reference Guide AT Commands Reference Guide
80304ST10041a Rev. 6 80304ST10041a Rev. 6 80304ST10041a Rev. 6 80304ST10041a Rev. 6 ---- 2010 2010 2010 2010----0 00 05 55 5----20 20 20 20
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 155 of 329
3.5.5.3. Message Receiving And Reading Message Receiving And Reading Message Receiving And Reading Message Receiving And Reading
3.5.5.3.1. New Message Indications To Terminal Equipment
New Message Indications To Terminal Equipment New Message Indications To Terminal Equipment
New Message Indications To Terminal Equipment ---- +CNMI
+CNMI +CNMI
+CNMI
+CNMI +CNMI +CNMI +CNMI ---- New Message Indications To Terminal Equipment New Message Indications To Terminal Equipment New Message Indications To Terminal Equipment New Message Indications To Terminal Equipment
AT+CNMI=[ AT+CNMI=[ AT+CNMI=[ AT+CNMI=[
<mode>[,<mt>
<mode>[,<mt> <mode>[,<mt> <mode>[,<mt>
[,<bm>[,<ds>
[,<bm>[,<ds> [,<bm>[,<ds>
[,<bm>[,<ds>
[,<bfr>]]]]]
[,<bfr>]]]]] [,<bfr>]]]]] [,<bfr>]]]]]
Set command selects the behaviour of the device on how the receiving of
new messages from the network is indicated to the DTE
DTE DTE DTE.
Parameter:
<mode>
<mode> <mode> <mode> - unsolicited result codes buffering option
0 - Buffer unsolicited result codes in the TA
TA TA TA. If TA TA TA TA result code buffer is full,
indications can be buffered in some other place or the oldest
indications may be discarded and replaced with the new received
indications.
1 - Discard indication and reject new received message unsolicited result
codes when TA
TA TA
TA----TE
TE TE
TE link is reserved, otherwise forward them directly to
the TE TE TE TE.
2 - Buffer unsolicited result codes in the TA in case the DTE DTE DTE DTE is busy and
flush them to the TE after reservation. Otherwise forward them directly
to the TE.
3 - if <mt> <mt> <mt> <mt> is set to 1 an indication via 100 ms break is issued when a SMS
is received while the module is in GPRS online mode. It enables the
hardware ring line for 1 s. too.
<mt> <mt> <mt> <mt> - result code indication reporting for SMS-DELIVER
0 - No SMS-DELIVER indications are routed to the TE and message is
stored.
1 - If SMS-DELIVER is stored into ME/TA, indication of the memory location
is routed to the TE using the following unsolicited result code:
+CMTI: <memr>,<index>
+CMTI: <memr>,<index> +CMTI: <memr>,<index> +CMTI: <memr>,<index>
where:
<memr>
<memr> <memr> <memr> - memory storage where the new message is stored
"SM"
"ME"
<index>
<index> <index> <index> - location on the memory where SMS is stored.
2 - SMS-DELIVERs (except class 2 messages and messages in the
message waiting indication group) are routed directly to the TE using
the following unsolicited result code:
(PDU Mode) (PDU Mode) (PDU Mode) (PDU Mode)
+CMT: <alpha
+CMT: <alpha +CMT: <alpha
+CMT: <alpha>,<length><CR><LF><pdu>
>,<length><CR><LF><pdu> >,<length><CR><LF><pdu>
>,<length><CR><LF><pdu>
where:
<alpha>
<alpha> <alpha> <alpha> - alphanumeric representation of originator/destination
number corresponding to the entry found in MT phonebook;
used character set should be the one selected with
cCSCS.