GE865 Hardware User Guide
1vv0300799 Rev.9 – 27-07-2009
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 18 of 70
NOTE:
In this document all the lines that are inverted, hence have active low signals are
labelled with a name that ends with”#" or with a bar over the name.
TIP:
To check if the device has powered on, the hardware line PWRMON should be
monitored. After 900ms the line raised up the device could be considered powered on.
NOTE:
It is mandatory to avoid sending data to the serial ports during the first 200mS of the
module startup.
