GE865 Hardware User Guide
1vv0300799 Rev.9 – 27-07-2009
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 56 of 70
12.1.2 Enabling DAC
An
AT command
is available to use the DAC function.
The command is:
AT#DAC= [<enable
>
[, <value>]]
<value>
- scale factor of the integrated output voltage (0..1023 - 10 bit precision)
it must be present if
<enable>=1
Refer to SW User Guide or AT Commands Reference Guide for the full description of
this function.
NOTE:
The DAC frequency is selected internally. D/A converter must not be used during
POWERSAVING.
12.1.3 Low Pass Filter Example
