DE910 Series Hardware User Guide
1vv0300951 Rev.9 – 2015-05-11
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved. Page 76 of 77
17.
Safety Recommendations
READ CAREFULLY
Be sure the use of this product is allowed in the country and in the environment required. The
use of this product may be dangerous and has to be avoided in the following areas:
Where it can interfere with other electronic devices in environments such as hospitals,
airports, aircrafts, etc.
Where there is risk of explosion such as gasoline stations, oil refineries, etc. It is the
responsibility of the user to enforce the country’s regulations and the specific
environmental regulation.
Do not disassemble the product; any evidence of tampering will compromise the warranty
validity. Follow the instructions of the hardware user guides for a correct wiring of the
product. The product has to be supplied with a stabilized voltage source and the wiring has to
conform to the security and fire prevention regulations. The product has to be handled with
care, avoiding any contact with the pads because electrostatic discharges may damage the
product itself.
The system integrator is responsible for the functioning of the final product; therefore, care
has to be taken with the external components of the module as well as of any project or
installation issue because of the risk of disturbing the CDMA network or external devices or
having impact on security. Should there be any doubt, please refer to the technical
documentation and the regulations in force. Every module has to be equipped with a proper
antenna with specific characteristics. The antenna has to be installed with care in order to
avoid any interference with other electronic devices and has to guarantee a minimum distance
from the body (20 cm). In case this requirement cannot be satisfied, the system integrator has
to assess the final product against SAR regulations.
