36
User’s Guide
Configuration
Telindus 1120 ADSL Router
Click
Exit
to return to the Telindus 9100 Maintenance Application.
ATM PVC Protocol Configuration
Click on
Protocol Configuration
in the left panel.
Figure 5.21 Protocol Configuration
You can enter the following information:
Encapsulation
Type:
Allows you to choose the encapsulation type used at the ATM
interface. The options are
SNAP/ IP, VC MUX over ATM, LLC
PPP over ATM, PPP over Ethernet,
and
SNAP/Bridge
protocols.
Enable In-ARP:
This is used by an ATM Permanent Virtual Circuit to determine
the IP address of a remote peer.
When selecting a specific encapsulation type, you have the following three options to
choose from:
Option 1. If you select
VC MUX over ATM
,
LLC PPP over ATM
or
PPP over
Ethernet
as your encapsulation type, then you can check the
Enable Network Address Translation (NAT)
checkbox if you have a
single user account for the
NAT Properties
feature. You can then
select the
Specified NAT IP Address
checkbox and enter the
desired IP address, or you can select the
Specified NAT Pool IP
Addresses
and enter the requested values.
Also, you
MUST
select the
PPP Configuration
feature from the list
located in the left panel, and enter the
User Name
and
Password
.
Option 2. If you select
SNAP/IP
as your encapsulation type, then you can
check the
Enable Network Address Translation (NAT)
checkbox if
you have a single user account for the
NAT Properties
feature. You
can then select the
Specified NAT IP Address
checkbox and enter
the desired IP address, or you can select the
Specified NAT Pool
IP Addresses
and enter the requested values.
Option 3. If you select
SNAP/Bridge
as your encapsulation type, then you can
check the
Enable Network Address Translation (NAT)
checkbox
if you have a single user account for the
NAT Properties
feature.
You can then select the
Specified NAT IP Address
checkbox and
enter the desired IP address, or you can select the
Specified NAT
Pool IP Addresses
and enter the requested values.
Once you have finished setting these parameters, click
Apply
to review the parameters
you have entered and then click
Finish
to send settings to the Telindus 1120 ADSL Router.
Click
Exit
to return to the Telindus 9100 Maintenance Application.