26
User’s Guide
Configuration
Telindus 1120 ADSL Router
Modify Bridge Packet Filter
If you want to change the parameters of an bridge packet filter, select the filter number,
and then click
Modify
. This will open the
Modify Bridge Packet Filter
window. You can
change any of the parameters or settings. When you are finished, click
OK
. If you do not
want to modify this filter, click
Cancel
to close the Modify Bridge Packet Filter window.
Remove Bridge Packet Filter
To delete a filter, select the filter number, and then click
Remove
. Click
Yes
to remove the
selected filter or click
No
to keep it.
Once you have finished setting these parameters, click
Apply
to review the parameters
you have entered and then click
Finish
to send settings to the Telindus 1120 ADSL Router.
Click
Exit
to return to the Telindus 9100 Maintenance Application.
Port Mapping Configuration
Application View
From Configuration, double-click on the
General Configuration
icon. Use the list in the left
panel to open the
Port Mapping Configuration
menu, and then click
Application View
.
Port Mapping allows you to map to certain applications (such as pcAnywhere or Blizzard
StarCraft) or services (such as an FTP server, web server, telnet, or mail server) using
Private IP addresses within an IP Master LAN. Incoming data packets being sent to a
specific IP port can be routed to the application or service using Port Mapping
Configuration.
Figure 5.9 Port Mapping by Application
To port map an application or service simply select it from the Application list, and while
holding down the left mouse button, drag and drop it into the Port Mapping List. Then you
will need to specify the internal IP address where the application or service resides. Do
this by clicking on the appropriate IP address from the list of Internal IP Addresses, and
while holding down the left mouse button, drag and drop it into the Port Mapping List.
If there is more than one entry in the Port Mapping list, be sure to drag and drop the
internal IP address to the correct application or service.
If the application that you need to port map is not available in the Application List, you will
need to create a port map for it. Drag and drop the
New Application
option from the
Application List to the Port Mapping List, drag and drop the appropriate internal IP address
to the
New Application
, and an Add Port Mapping Item window will appear. Refer to the
following section
Port Mapping Table
for further information.
Note:
If you drag and drop the
New Application
option from the Application List to the Port
Mapping List, then you can modify this item by
selecting
Table View
and clicking
Modify
.
All other applications in the Application List CANNOT be modified anymore.