22
User’s Guide
Configuration
Telindus 1120 ADSL Router
IP Routing Table
The next configuration panel in the Telindus 1120 ADSL Router is the IP Routing Table.
The IP Routing Table indicates the Telindus 1120 ADSL Router which path or route to use
when forwarding data packets. From this panel, you can
Add New IP Route
,
Modify IP
Route
, or
Remove IP Route
.
Figure 5.3 IP Routing Table
Add New IP Route
To add a new IP route, click the
Add
button. This will open the Add New Route window.
Figure 5.4 Add New Route
Enter the following information:
Destination
IP Address
:
The IP address of where data packets are to be sent.
Subnet Mask
:
The subnet of the Destination IP Address.
Gateway
IP Address
:
The IP address of the gateway on the LAN where data packets
are to be sent. The Gateway IP Address can only be set if the
route uses the LAN interface, otherwise it is grayed-out.
Interface
:
Determines whether data packets are to be sent to LAN or DSL
through the specified interface.
ATM PVC:
Allows you to select a specific ATM PVC profile.
When you are finished, click
OK
. If you do not want to create a new route, click
Cancel
to
close the Add New Route window.