manualshive.com logo in svg

Telindus 1120, User Manual, Page: 42 / 61

Share
Download
Telindus 1120 User Manual Download Page 42

Telindus 1120 ADSL Router

Configuration

User’s Guide

35

ATM PVC Properties

After typing in the name and clicking 

OK

, the 

ATM PVC Properties 

panel will appear. Note 

that a maximum of 8 PVCs may be defined. If you double-click on the icon of a previously 
created PVC, the 

ATM PVC Properties

 panel will also appear.

Figure 5.19 ATM PVC Properties

The 

ATM PVC Properties

 panel allows you to change the name of the selected ATM 

interface and to set the values of Virtual Path Identifier (VPI) and the Virtual Channel 
Identifier (VCI). The minimum and maximum values of the VCI are 32 and 4,095, 
respectively. VCI values from zero to 31 are reserved for well-known protocols. Note that 
two ATM PVC connections can have the same VCI value only if the VPIs are distinct.
Once you have finished setting these parameters, click 

Apply

 to review the parameters 

you have entered and then click 

Finish

 to send settings to the Telindus 1120 ADSL Router. 

Click 

Exit

 to return to the Telindus 9100 Maintenance Application.

ATM Service Type

Click on 

ATM Service Type 

in the left panel

.

Figure 5.20 ATM Service Type

This panel allows you to select the ATM Service Type for the ATM interface. Presently, 

Unspecified Bit Rate (UBR)

 and 

Constant Bit Rate (CBR)

 are available. You can specify 

the Peak Cell Rate (PCR) in kbps. This panel also allows you to specify the period for the 

Operations And Maintenance (OAM) F5

 (virtual channel) timer. If the period is set to zero, 

the OAM F5 loopback cell is not sent. If the period is set to a non-zero value, the loopback 
cell is transmitted to the remote peer according to the specified period. Note that the local 
peer will always respond to a loopback cell that is transmitted by the remote peer.
Once you have finished setting these parameters, click 

Apply

 to review the parameters 

you have entered and then click 

Finish

 to send settings to the Telindus 1120 ADSL Router. 

Summary of Contents for 1120






























































Reviews:

No comments