12
User’s Guide
Software Installation
Telindus 1120 ADSL Router
3.2 Detecting TCP/IP in Windows
®
95/98
Step 1.
Turn on your computer and start Windows
®
95/98.
Step 2.
Click the
Start
button and then select
Settings
.
Step 3.
Choose
Control Panel
and
double click
Network
icon.
Step 4.
Click the
Configuration
tab.
A. If you see TCP/IP listed under Network Components, you already have
TCP/IP on your Windows
®
95/98. Proceed to configuration directions for
Windows
®
95/98 in Section 3.4.
B. If you do not see TCP/IP listed under Network Components, you do not have
TCP/IP on your Windows
®
95/98. Proceed to the next section,
“Installing
TCP/IP in Windows
®
95/98.”
3.3 Installing TCP/IP in Windows
®
95/98
Step 1.
From the
Configuration
tab in the Network window, click
Add
.
Step 2.
Select
Protocol
for the type of network component, and click
Add
.
Step 3.
Choose
Microsoft
for Manufacturers list box and
TCP/IP
for Network
Protocols list box, then click OK.
Step 4.
Check to see
TCP/IP
is listed under Network Components.
A. If you do not see
TCP/IP
listed under Network Components, you have not
installed TCP/IP. Repeat Steps 1 - 4.
B. If you see
TCP/IP
listed under Network Components, you already have
TCP/IP on your Windows
®
95/98. Proceed to configuration directions for
Windows
®
95/98 in Section 3.4.
3.4 Configuring TCP/IP in Windows
®
95/98
Step 1.
From the
Configuration
tab, select
TCP/IP
(for Ethernet adapters) listed under
Network Components and then click
Properties
.
Step 2.
Select the
IP Address
tab.
You now have the option of using either dynamic or static IP addressing.
To enable dynamic IP addressing:
Step 1.
Click
Obtain an IP Address automatically
.
Step 2.
OPTIONAL*
Click the
DNS Configuration
tab and select
Disable DNS
. If you
previously entered any parameters, clear all pre-existing settings.
Step 3.
Select the
Gateway
tab and then click
Remove
to clear all pre-existing
settings.
Step 4.
Click
OK
to exit
TCP/IP Properties
window and click
OK
to exit
Network
window. When prompted, restart Windows
®
95/98. If you are not prompted to
restart Windows
®
95/98, do so manually. Proceed to
Chapter 4,
“Telindus 9100 Maintenance Application.”
* If specifically required by your ISP, you may need to enter DNS information.
To enable static IP addressing:
Step 1.
Click
Specify an IP Address
and then type the
IP Address
and
Subnet Mask
(for your PC).
Step 2.
Click the
Gateway
tab.
Step 3.
Type in your
Gateway IP Address
from your ISP and then click
Add
.
Step 4.
Click the
DNS
tab. Enter the
Host
name,
Domain
name, and
DNS
Service
Search Order
(for your LAN) and then click
Add
.
Step 5.
Click
OK
to exit
TCP/IP Properties
window and click
OK
to exit
Network.
Step 6.
When prompted, restart Windows
®
95/98. If you are not prompted to restart
Windows
®
95/98, please do so manually. Proceed to
Chapter 4,
“Telindus 9100 Maintenance Application.”