manualshive.com logo in svg

Telindus 1120, User Manual, Page: 12 / 61

Share
Download
Telindus 1120 User Manual Download Page 12

2

User’s Guide

Before you begin

Telindus 1120 ADSL Router

RIP

Telindus 1120 ADSL Router allows you to utilize both versions of the Routing Information
Protocol, RIP-1 and RIP-2, to improve your route setup time.

DHCP Server User-Defined Lease Time

The Telindus 1120 ADSL Router provides a Dynamic Host Configuration Protocol (DHCP)
server for the individual network devices on your LAN network. Instead of relying on a
default value, you can specify the amount of time that a network device can be assigned
(leased) an IP address before the router makes the address available for re-assignment.
Using a lease time appropriate to your network’s structure will optimize the availability of
dynamic IP addresses.

Port Mapping

Port Mapping enables the hosting of web servers, ftp servers, mail servers, and allows for
the playing of internet games by mapping internet traffic associated with particular ports to
respective IP addresses.

Port Auto-Forwarding

Port AutoForwarding ensures that traffic routed through Network Address Translation
(NAT) will retain the correct destination port information. This is crucial for applications
running on a private LAN that need to send data to a specific port to properly establish and
maintain a session.

1.2 New Features in Version 5.3

New Encryption Types

Telindus 1120 ADSL Router version 5.3 supports new encryption types in the DSL
Protocol Configuration panel. These include PPP over Ethernet and SNAP/Bridge with
NAT encapsulation. Please 

refer to Chapter 5, “

ATM PVC Protocol Configuration

.”

DSL RIP

Now the Routing Information Protocols, RIP-1 and RIP-2, are supported on both the LAN
and the WAN sides. Please refer to 

Chapter 5, “

ATM PVC RIP Configuration

.”

MLPPP client VPN

You can now launch multiple Microsoft’s Point-to-Point Tunneling Protocol (PPTP) Virtual
Private Network (VPN) clients when Network Address Translation (NAT) is enabled.

1.3 Package Includes

• One Telindus 1120 ADSL Router
• Power cord and adapter
• Software CD-ROM (contains Telindus Installation software, Software User’s

Guide)

• One RJ-11 to RJ-11 phone cable (7ft)
• One RJ-45 to RJ-45 straight Ethernet cable (7ft)

Summary of Contents for 1120






























































Reviews:

No comments