Model TGFX-HUB1
© 2018 Telguard
17
FlexHub is resetting its connection with the HomeControl Flex server to report the new device.
If the FlexHub does not find a new device to add within 1 minute it will exit inclusion mode and return
to normal operation.
After the device is added and appears in the device list, use the Edit button to open the device details
page. Change the default device name to a more user-friendly name (e.g., Downstairs Thermostat or
Den Lamp) and press the Save button.
In the case of a multi-endpoint device such as a power strip with individually-controllable outlets, use
the same method to assign a user-friendly name to each endpoint in the device list, taking care to
verify that the new name corresponds to the expected endpoint.
REMOVE A Z-WAVE DEVICE
To remove a Z-Wave device from the network, select the Edit button next to its icon to open the
device details page. Then select the Delete Device button.
The FlexHub Controller will attempt to exclude the selected device. A flashing Z-Wave LED indicates
the FlexHub is in exclusion mode.
As with adding a device, be sure you are also ready to place the new Z-Wave device into exclusion
mode.
If required, refer to the device manufacturer’s documentation to activate the “Exclude” function
because many devices do not use a physical button to start the exclude process.
Once the device is removed from the network, the Internet light will begin to flash, indicating the
FlexHub is resetting its connection with the HomeControl Flex server to report the device removal.
If a Z-Wave device is an orphan (it belongs to another network) it must be removed from its current
network before it will try to join the FlexHub network. From the Devices tab, select the Edit button.
Then select the Delete Orphan Device button. The FlexHub will enter exclusion mode as indicated by
the flashing Z-Wave LED.
As with adding and removing a device, be sure you are also ready to place the new Z-Wave device
into exclusion mode.
If required, refer to the device manufacturer’s documentation to activate the “Exclude” function
Summary of Contents for FlexHub TGFX-HUB1
Page 1: ...FlexHub Installation Guide Model TGFX HUB1 ...
Page 29: ......
