Chapter 7: About the Setup Options
TELEX SpinWise CD Duplicator
34
Eject Disc
This option controls the ejection of the discs by the CD writer. Three settings are available: the
default setting is the “Eject Good Only” setting, which will only eject the passed discs
automatically and leave the failed ones in the CD writers; the “Eject All Disc” setting will eject
all discs, whether or not they passed or failed; the “Do Not Eject” setting causes all the discs to
remain in the CD writers when the job is done and the user will have to eject the discs manually.
Burn On The Fly
This option controls the writing methods to the CD. When this setting is ON, the data will direct
copy from the source drive to the target drives. When the setting is OFF, the data will load into a
particular temporary partition in the hard drive and then the copied data will come from the
source partition.
Burn Mode
This option controls the writing methods to the CD including the “Disc At Once” (DAO) or
“Track at Once” (TAO). The default setting is Disc At Once. Some CD writers may support
different writing methods. If the method selected is not supported, the duplicator will
automatically switch to the other one.
Button Sound
This option controls whether the button sound is ON or OFF. The default setting is ON.
Device Info
This option shows what drives are installed.
System Info
This option shows the system information of the LCD such as the internal firmware revisions.
Quick Erase
This option initiates a quick erase of the data on the CD-RW disc.
Full Erase
This option will do a complete erase of the data on the CD-RW disc. This will take a minute to
complete.
