Chapter 5: Using the Hard Drive Partitions as the Source
TELEX SpinWise CD Duplicator
28
Loading a CD (Image) into a Partition of the Hard Drive
The
9-01 Image Load
option is used to load the data from a Master CD to a partition on the
hard drive.
How to Use the
9-01 Image, Load
option:
1.
Use the down-arrow button to scroll down to the
9.Image
function. Then press the
OK
button to select it. The option,
9-01 Image Load
is the first option presented within the
Image
function.
2.
Place a Master CD in the CD-ROM drive (top disc drawer).
3.
Press
OK
to start the load process. If the selected partition is already written to, then
select another working partition and press the
OK
button to select it. Press the
OK
button again to confirm your selection. Press the
OK
button again to start the Load of the
Master CDs contents to the partition displayed in the LCD Panel.
4.
The LCD Panel displays the status of the load process and when the load is finished, the
LCD will show the results.
Delete the Contents of a Hard Drive Partition
The
9-02 Image, Delete Image
option is used to delete the data (image) stored in the
currently-displayed partition of the hard drive.
How to Use the
9-02 Image, Delete Image
option:
1.
Use the down-arrow button to scroll to the
9.Image
function. The press the
OK
button
to select it. Use the down-arrow to display the option,
9-02 Image, Delete Image
.
Press the
OK
button.
2.
At the system prompt, “
Delete Image in Partition? Yes
” Use the down-arrow button
to display
No
and then press the
OK
button to cancel the option, or, if
Yes
, then press
the
OK
button and the data in the displayed partition is immediately deleted.
Review the Contents of a Partition
The
9-03 Image, Image Info
option is used to examine the contents of the currently displayed
hard drive partition.
How to Use the
9-03 Image, Image Info
option:
1.
Use the down-arrow button to scroll to the
9.Image
function. The press the
OK
button
to select it. Use the down-arrow to display the option,
9-03 Image, Image Info
. Press
the
OK
button. The LCD Panel displays the Number of Sessions and the Number of
Tracks.
2.
Press the down-arrow button to view the total number of minutes and the size of the data
in Megabytes.
3.
Press the down-arrow button again to view the tracks in the first session.
4.
Press the down-arrow button again to view the number of minutes in the first track.
5.
Repeat step 4 for each track and press the
OK
or the
ESC
button to exit this option.