TELEX SpinWise CD Duplicator
Chapter 3 The Basics
7
Loading a CD onto the Hard Drive
Overview
This procedure applies to SpinWise systems that have a hard drive. It
explains how to copy the contents of a CD into a partition on the hard drive.
Once a CD is copied to the hard drive, it is easy to make duplicates using all
of the available CD drives.
The Initial
Default
Function
1.
Turn on the system. Note that the copy command is displayed. Your
LCD display should look like this:
Insert the
Master CD
2.
Place the CD to be Loaded onto the Hard Drive into the Master (Source)
Drive (the top drive of your SpinWise system).
Select the
Image Load
Function
3.
Use the down arrow button to display the
Image
function:
Then press the
OK
button to select the
Image
function. Note that the LCD
Panel display shows which partition of the hard drive the CDs contents
(image) will be loaded into. In the following example, the Image will be
loaded into hard drive partition A:
(To learn more about how to select a particular partition on the hard drive,
see page 20.)
9-01. Image P: A
Load
OK
ESC
TELEX
SpinWise
9. Image
OK
ESC
TELEX
SpinWise
1. Copy
OK
ESC
TELEX
SpinWise