TELEX SpinWise CD Duplicator
Chapter 3 The Basics
11
Copying Selected Tracks to a Partition on the Hard Drive
Overview
This procedure applies to SpinWise systems that contain a hard drive. It
explains how to identify and copy selected tracks from multiple CDs into a
partition on the hard drive.
Note the Initial
Operation
Mode
1.
Turn on the system. Note that the copy command is displayed. Your
LCD display should look like this if your last operation involved
duplicating from a Master CD:
If your last operation involved duplicating CDs from a hard disk
partition, then the last used partition will be displayed. For example:
Define the
Source
2.
Press the down-arrow button to scroll to the
8.Select Source
function:
3.
Press the
OK
button to select the
8.
Select Source
option.
4.
Use the down arrow button to display the top drive (IDE 1) as the Master
or “source” and press the
OK
button to select the source. Press the
OK
button again to confirm the selected source. This step may be skipped if
the CD-ROM drive was previously defined as the “source.”
5.
Place the CD from which you will copy the first track into the top
(source) drive.
Go to the Edit
Track
Function
6.
Use the down arrow button to scroll to the
10.Edit Track
function, and
then press the
OK
button to select it.
8. Select Source
10. Edit Track
1. Copy P: A
1. Copy
