TELEX SpinWise CD Duplicator
Chapter 3 The Basics
9
Copying from a Partition on the Hard Drive
Overview
This procedure applies to SpinWise systems that have a hard drive. It
explains how to copy a CD that has been loaded into a partition on the hard
drive to blank CDs in all of the available CD drives in the system.
Initial
Operation
Mode
1.
Turn on the system. Note that the copy command is displayed. Your
LCD display should look like this:
2.
Use the down arrow button to display the
8.Select Source
function.
Your LCD display should look like this:
Select the
Hard Drive
(HDD) as the
Source
3.
Press the
OK
button, and then press the down arrow key to select the
HDD Source. For example, your LCD display should look like this:
4.
Press the
OK
button again to confirm that the hard drive is selected:
5.
Then press the
ESC
button to return to the list of functions, and use the
up or down arrow keys to redisplay the
1.Copy
function. Note that the
Copy
function now indicates the hard disc source of data. In the
following example, the hard disk partition that is the “Source” is
partition A:
The
Copy
function is indicating that it will be copying from
P
artition
A
of the hard drive. To learn how to select a different partition, refer to
page 20.
1. Copy P: A
HDD Selected!
Src: HDD
00 IDE0 Master
8. Select Source
1. Copy
