Chapter 3 The Basics
TELEX SpinWise CD Duplicator
8
Loading a CD onto the Hard Drive (continued)
Load the
Contents of
the Master CD
onto the Hard
Drive
4.
Press the
OK
button. The LCD Panel display will indicate the status of
the load process by displaying the percent of the CD’s contents that have
been loaded, the number of tracks that have been loaded, etc.
In the following example, we can see that the contents of the Master CD
are being loaded into partition A of the hard drive. This particular
“snapshot” shows that 43 percent of the CD has been copied, 9 of the 15
tracks have been copied, the present copying speed is 35X, and that 26
seconds of track 9 have yet to be copied from the Master CD to the hard
drive:
When the load process is complete, the system will beep and display the
following message:
Congratulations! You have just loaded a master CD onto the hard drive.
Remove the
Master CD
5.
Remove the master CD from the Master (source) drive.
Exit the Image
Load Function
6.
Press the
ESC
button two times to return to the numbered functions list.
Use the up or down arrow buttons to set the display to
1.Copy.
Image Load OK
OK
ESC
TELEX
SpinWise
Load-A- 35X 43%
9/15 Trk 00:26
OK
ESC
TELEX
SpinWise
1.Copy