Televes COFDM-PAL CI, User Manual

Page: 39 / 56

39
User manual COFDM-PAL CI STEREO
ENGLISH
R will be modulated in both carriers and the
indication will always be mono.
In automatic mode, the signal and the modu-
lated signals will depend on the indication
obtained in the demodulated audio stream.
If, in the audio subcarrier menu, another
option other than 5,5 MHz is selected, the
signal will always be mono, and the options
will be as follows:
AUDIO
Audio: 01/02
Audio level:
Right
AUDIO
Audio: 01/02
Audio level:
Automatico
- Audio for language:
There are no selectable options
- Audio for index:
The corresponding audio subcarrier willl be
modulated (L+R)/2.
R will be modulated in the audio subcarrier.
L will be modulated in the audio subcarrier.
AUDIO
Audio 1: fin
Audio 2: den
AUDIO
Audio: 01/02
Audio level:
Left
AUDIO
Audio: 01/02
Audio level:
R+L
AUDIO
Audio: 01/02
Audio level:
Right
Note: If the service of audio is dual mono (a
language in the channel L and another
one in channel R), the user it will have
to select the suitable option (Right o
Left). If Stereo is selected will leave
both languages, each one in its chan-
nel.
To carry out the modification the key
must be pressed until the desired parameter
flashes. Then the correspondent field can be
modified using the
and keys.
e.- Monitor menu
This menu shows the following information:
estimation of the BER (bit error rate before
Viterbi) and the firmware version of the
MPEG decoder.
MONITOR >>
CBER: 2.4E-3
V.MPEG:
X.XX